MIL-S-24603A(SH)
PUBLICATION
NAVAL SEA SYSTEMS COMMAND (NAVSEA)
0900-LP-001-7000 - Fabrication and Inspection of Brazed Piping
System.
(Copies of specifications, standards, and publications required by
contractors in connection with specific acquisition functions should be obtained
from the contracting activity or as directed by the contracting activity. )
2.2 Other Publications. The following documents form a part of this
specification to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted shall be those listed in the issue
of the DoDISS specified in the solicitation. Unless otherwise specified, the
issues of documents not listed in the DoDISS shall be the issue of the nongovern-
ment documents which is current on the date of the solicitation.
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
B 463 - Standard Specification for UNS N08020, UNS N08026, and
UNS N08024 Alloy Plate, Sheet, and Strip.
(Application for copies should be addressed to the American Society for
Testing and Materials, 1916 Race Street, Philadelphia, PA 19103.)
SOCIETY OF AUTOMOTIVE ENGINEERS, INC. (SAE)
AMS 5596 - Alloy Sheet, Strip, and Plate, Corrosion and Heat
Resistant 52.5Ni - 19Cr - 3.OMO - 5.l(Cb+Ta) - 0.90Ti
- 0.50A1 - 18Fc Consumable Electrode or Vacuum
Induction Melted 1750°F (955°C) Solution Heat
Treated,
(Application for copies should be addressed to the Society of Automotive
Engineers, Inc. , 400 Commonwealth Drive, Warrendale, PA 15096.)
(Nongovernment standards and other publications are normally available from
the organizations which prepare or which distribute the documents. These
documents also may be available in or through libraries or other informational
srvnices.)
2.3 Order of precedence. In the event of a conflict between the text of
this specification and the references cited herein (except for associated detail
specifications, specification sheets or MS standards), the text of this specifi-
cation shall take precedence. Nothing in this specification, however, shall
supersede applicable laws and regulations unless a specific exemption has been
obtained.
3.
REQUIREMENTS
3.1 First article. When specified in the contract or purchase order, a
sample shall be subjected to first article inspection (see 4.3 and 6.3).
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business